 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| (R) SF1062A 211.0 MHz SAW Filter Value +10 30 -40 to +85 260C for 30 s Units dBm VDC C * * * * * Designed for GSM PCS Receiver IF Applications Simple External Impedance Matching Hermetic SMP-87 Surface-Mount Case Unbalanced Input and Output Complies with Directive 2002/95/EC (RoHS) Pb Absolute Maximum Ratings Rating Maximum Incident Power in Passband Max. DC voltage between any 2 terminals Storage Temperature Range Suitable for lead-free soldering - Max Soldering Profile SMP-87 Electrical Characteristics Characteristic Nominal Center Frequency Passband Insertion Loss at fc 1.5 dB Passband 2 dB Passband 3 dB Passband Amplitude Ripple over fc50 kHz Group Delay Variation over fc 50 kHz Absolute Group Delay Rejection fc-400 to fc-200 and fc+200 to fc+400 MHz fc-600 to fc-400 and fc+400 to fc+600 MHz fc-800 to fc-600 and fc+600 to fc+800 MHz 191 MHz to fc-800 kHz and fc+800 kHz to 231 MHz Operating Temperature Range Impedance Matching to 50 unbalanced Case Style Lid Symbolization (YY=year, WW=week) TA 1 1, 2, 3 GDV GD 5 25 30 35 -40 External L-C SMP-87 22.1 X 8 mm Nominal Footprint RFM SF1062A YYWW 35 45 +85 C dB Sym fC IL BW1.5 BW2 BW3 1, 2 Notes 1 50 80 100 135 1.5 200 2.6 500 dBP-P nsP-P s kHz Min Typ 211.000 6 Max 9.0 Units MHz dB Electrical Connections Connection Port 1Hot Port 1 Gnd Return Port 2 Hot Port 2 Gnd Return Case Ground Terminals 2 3 8 9 All Others Notes: 1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 and measured with 50 network analyzer. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. "LRIP" or "L" after the part number indicates "low rate initial production" and "ENG" or "E" indicates "engineering prototypes." The design, manufacturing process, and specifications of this filter are subject 6. to change. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. US and international patents may apply. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc. (c)Copyright 1999, RF Monolithics Inc. Electrostatic Sensitive Device. Observe precautions for handling. 2. 3. 7. 8. 9. 10. 4. 5. RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: info@rfm.com http://www.rfm.com SF1062A 112904 211.00 MHz SAW Filter RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: info@rfm.com http://www.rfm.com SF1062A 112904 211.00 MHz SMP-87 Case SAW Filter 10-Terminal Ceramic Surface-Mount Case 22.1 x 8 mm Nominal Footprint Case Dimensions Dimension A B C D E H M N P Min 21.90 7.80 mm Nom 22.10 8.00 1.78 2.29 1.02 1.0 4.83 2.41 1.905 Max 22.40 8.30 2.00 Min 0.862 0.307 Inches Nom 0.870 0.315 0.070 0.090 0.040 0.039 0.190 0.095 0.075 Max 0.882 0.327 0.079 Materials Solder Pad Termination Lid Body Pb Free Au plating 30 - 60 inches (76.2-152 m) over 80200 inches (203-508 m) Ni. Fe-Ni-Co Alloy Electroless Nickel Plate (8-11% Phosphorus) 100-200 inches Thick Al2O3 Ceramic Port 1 Port 2 Electrical Connections Connection Input or Return Return or Input Output or Return Return or Output Ground Single Ended Operation Differential Operation Terminals 10 1 5 6 All others Return is ground Return is hot H B C D N E (10 Places) A P (8 Places) M Terminal Detail TOP VIEW BOTTOM VIEW RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: info@rfm.com http://www.rfm.com SF1062A 112904 BILL OF MATERIALS PART IDENTIFIER SF1062A-DEMO 400-1400-001 400-0533-001 500-0319-001 SF1062A-LRIP SF1062A-000 500-0003-180 500-0003-270 500-0248-001 500-0010-560 500-0010-470 500-0010-120 500-0010-047 DESCRIPTION 1 DEMO BOARD, SF1062A, PCB, DEMO BOARD, SF1081A SHIELD, TO-39 TEST FIXTURE TAPE, COPPER FOIL, SCOTCH FILTER, SM, 211.000 MHZ ASSY DIAGRAM, DEMO BOARD, CAP, CHIP, NPO, 18(J), STD CAP, CHIP, NPO, 27(J), STD CONN, COAX, FLANGE MT. JACK IND, CHIP, 1008CS, 56 NH, 10% IND, CHIP, 1008CS, 47 NH, 10% IND, CHIP, 1008CS, 12 NH, 10% IND, CHIP, 1008CS, 10% DESCRIPTION 2 NORTEL MATRA CELLULAR 1.0000 1.0000 0 1.0000 0 1.0000 1.0000 2.0000 1.0000 1.0000 1.0000 1.0000 QTY/ASSY REFERENCE DESCRIPTION TYPE 1181, 44F3260, 1/2" NORTEL MATRA SF1062A 4 HOLE COIL CRAFT 1008CS-560 C1 C2 J 1, 2 L1 L2 L3 L4 SIZE FSCM NO. DWG NO. A SCALE 2U874 7387 REV SF1062A-DEMO A SHEET NONE W/O or ECN 1 OF 2 REV HISTORY REV A ECN 7387 DATE 01/06/99 INITIAL RELEASE DESCRIPTION SIZE FSCM NO. DWG NO. A SCALE 2U874 7387 REV SF1062A-DEMO A SHEET NONE W/O or ECN 2 OF 2 |
Price & Availability of SF1062A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |